Focus RS MK2 Airtec Stage 3 Intercooler
Airtec stage 3 is the only off the shelf intercooler that uses a 100mm deep core! we use this core only in the most extreme coolers, we name the 100mm core 'GobStopper' due to it's amazing cooling properties
The Airtec stage 2 had already proved itself in the Focus RS tuning scene as the must have mod for 400+ cars, we wanted to take the stage 3 to a whole new level and it took well over 10 month's to get perfect.
Every Stage 3 Intercooler comes with a 70mm cold side hose, if you have a big boost pipe kit fitted, your Hot side pipework will still fit.
Features of Stage 3.
- Smooth flow curved end tanks, for that ultimate flow
- Cold side Intercooler end tank made with 70mm outlet to match the throttle body outlet
- 70mm Alloy'silicon cold side hose, if you have a big boost pipe kit fitted, your Hot side pipework will still fit
- Huge high flow 100mm core AKA 'The GobStopper'
- Air-Ram Scoop, forces Air directly into core of intercooler
- Fitting takes 2-3 hours max, NO Bumper removal required
- Increased BHP & torque Figure
- Available in Pro-Series Black or Natural Silver
- Strongest Intercooler available, backed up by our 3 year warranty.
- Made by Europes No.1 Intercooler supplier for the Mk2 RS
Test results
- AIRTEC Stage2 Intercooler - Max power 594.2 bhp & 546.3 lbft torque
- Run 1 Air temp into Intercooler 164 degrees & Air temp out of Intercooler 25 degrees
- Run 2 Air temp into Intercooler 163 degrees & Air temp out of Intercooler 27 degrees
- Run 3 Air temp into Intercooler 168 degrees & Air temp out of Intercooler 28 degrees
- AIRTEC Stage3 Intercooler - Max power 631.5 bhp & 600.5 lbft torque
- Run 1 Air temp into Intercooler 166 degrees & Air temp out of Intercooler 21 degrees
- Run 2 Air temp into Intercooler 167 degrees & Air temp out of Intercooler 22 degrees
- Run 3 Air temp into Intercooler 171 degrees & Air temp out of Intercooler 22 degrees
Gains of 37.3+ bhp peak & 54.2 lbft torque increase. This was simply by swapping from stage2 to stage3, Please note if you were fitting stage 3 on a 400+bhp car you would not see gains like above, this intercooler was designed for Genuine 500+ bhp cars, it will improve a 400+ bhp car but not to the level of the car on test.